Filter
Top Products
77
REFERENCE
Italiano SvenskaDeutsch NederlandsEnglish FrançaisEspañol
TV issues What to do
No video on the TV screen,
though the TV audio
functions
• Check the TV video input selection. Make sure it is correct for the video source.
No sound from TV
• Check the connections.
• Make sure component is turned on.
• Refer to the component owner’s manual.
TV screen goes dark or the
image flips repeatedly after a
change is made to a Video fea-
ture in System settings
• In the System menu, make sure the Video format is set to NTSC (U.S. standard) or PAL
(European standard).
• In the Settings list, make sure the SD Progressive Scan setting is off, unless you have used a
component video connection and progressive scan is a feature of the TV.
TV turns on and off unexpect-
edly
• Reposition the TV on/off sensor on the back of your TV. Or check the SCART connector if you use one.
• Verify that the TV on/off sensor is working properly by choosing
TV Power Status
under Video in the
System menu.
Parental Control forgotten
or does not work
• In the DVD feature of the System menu, use the number buttons on the remote to enter 2673 in the
Password blanks. This provides temporary access and allows you to change the password.
00.LIV_IG.book Page 77 Monday, January 12, 2009 10:58 AM