Filter
Top Products
53
TAB 5TAB 4TAB 6TAB 8TAB 7English TAB 3TAB 2
USING THE VARIOUS SOURCES
Playing a disc
1. Press CD•DVD on the remote to select the disc
player.
This turns the system on if it was off.
2. On the media center, lift the door and press the
Open/Close button.
Insert a clean disc into the tray (label side up).
If it is not clean, the disc may unexpectedly pause.
If so, remove the disc and follow the instructions
for cleaning it (on the right).
3. Press the Open/Close button again to close the tray.
4. Press Play on the remote to start the disc.
For a DVD, you may need to press Play more than
once to move through the DVD on-screen options
and select play.
Note: With an MP3 disc, track information scrolls continuously on
the media center display. To clear this information, press and hold the
Info button on the remote. Press this button again to resume display
of this information.
Cleaning discs
Handle discs by their edges to prevent fingerprints and
scratches.
• To remove stains or fingerprints from the surface of a
disc, use a soft, lint-free, dry cloth. Wipe in straight
movements from the center of the disc to the outside.
Do not use any chemical products; they can damage
the disc.
• To minimize exposure to dust and dirt, replace discs in
their cases after use. Store each disc in its case, out of
direct sunlight, high temperatures, and humidity.
Note: Use only a disc-compatible pen or label when (or if) you write
on the disc.
08.LIV_Playing each of the sources.fm Page 53 Thursday, January 15, 2009 3:04 PM