Filter
Top Products
46
COMPLETE SYSTEM CONNECTIONS
EnglishTAB 6TAB 8 TAB 7 TAB 3TAB 5 TAB 2TAB 4
12. Press the CBL•SAT On/Off button on your
LIFESTYLE
®
remote. Press this button
again.
• If the device turns off and on, you have chosen a
code that works. Try changing channels to make
sure this code gives you full control.
• If your device does not turn off or does not
respond to other controls, select another code
and check again to make sure it works.
13. When you have the right code, press ENTER.
14. Follow the steps in “Setting the remote for another
device” next.
Or, press the System or Exit button to dismiss the
system menu from your TV screen.
15. Then continue with on page 47 for fine tuning
your setup.
Setting the remote for another device
Follow the steps used to set the remote for CBL•SAT,
but with these changes.
For VCR:
1. Using the LIFESTYLE
®
remote, press the
VCR button to select the source and turn on
the system if it is off.
2. Turn on your VCR device and set the options for
VCR in the Remote Control menu.
3. Use the VCR On/Off button on the LIFESTYLE
®
remote to make sure the code works.
For AUX:
1. Using the LIFESTYLE
®
remote, press the AUX
button to select the source and turn on the system
if it is off.
2. Turn on your AUX device and set the options for
AUX in the Remote Control menu.
3. Use the Channel or Volume button on the
LIFESTYLE
®
remote to make sure the code works.
4. Continue with on the next page for fine tuning
your setup.
12
12
00.LIV_IG.book Page 46 Monday, January 12, 2009 10:58 AM