Filter
Top Products
48
COMPLETE SYSTEM CONNECTIONS
EnglishTAB 6TAB 8 TAB 7 TAB 3TAB 5 TAB 2TAB 4
Beginning the process
1. Plug the headset cable into the AUX connector on
the media center.
Be sure to match the colors on the plugs to the
colors on the connectors: red to red and white to
white.
Note: If you have another device connected to the AUX
input, temporarily disconnect it.
2. Lay the headset close to where you watch TV.
Do not put on the headset until the instructions
indicate this.
3. Turn on your TV.
4. On the media center, lift the front cover and press
the Open/Close button to open the disc drive.
5. Insert Disc 1 into the drive and press Open/Close
again.
6. On the LIFESTYLE
®
remote control, press the
CD•DVD button.
This turns on the system and begins to play the
DVD.
A Bose
®
image should appear on screen. If it does
not, change the TV Video Input until the picture
appears.
7. Watch the DVD until you hear instructions to
replace Disc 1 with Disc 2.
AUX
L & R
Headset
00.LIV_IG.book Page 48 Monday, January 12, 2009 10:58 AM