Filter
Top Products
Installation & Operations Manual
CR-25E Cable Beam Barrier Installation, Adjustment & Maintenance 9 of 31
© 2007 B&B ARMR WWW.BB-ARMR.COM (800) 367-0387
1.7 Recommended Replacement Oils for CR-25E
Direct replacement of oils is very complicated and should be considered carefully when
doing so. The following oils are recommended by the manufacturer of the transmissions
on the warning gates and barriers.
The multi-grade Mobil SHC 629 synthetic oil is the manufacturers first choice. If this oil
is not available, Exxon Terrestic SHP 150 can be used as a direct replacement. The
temperature range is -30°F to 165°F.
If neither of the two above mentioned oils is available, almost any ISO Grade 150 or
AGMA Lubricant #4 with a pour point of -40°F or less & a viscosity of approx. 726
(SUS@100°F) is acceptable.
The following grease is recommended by the manufacturer of the flange type bearings
used on both the warning gates and barriers.
Texaco Marfax or Texaco Starplex grease is the manufacturers first choice. If this grease
is not available, consult your local supplier for an equivalent.