Barco PGWU-618 Home Theater System User Manual


 
3. Commands
Pos
Size
Name Description
Content
0x00
Off (hex)
11
power s tatus
0x03
On (hex)
3.87 set rear projection mode, write
About this command
This command sets the rear projection mo de.
Request
Pos
Size
Name Description
Content
0 1 set adj byte value known as "set ad j"
0x20
set adj (hex)
1 1 adj rear
0xA2
adj rear (hex)
0x00
Off (hex)
2 1 rear projection mode
status
0x01
On (hex)
3.88 set saturation, write
About this command
This command sets the saturation value of the active source.
Request
Pos Size Name Description Content
0 1 set adj byte value known as "set ad j"
0x20
set adj (hex)
1 1 adj saturation
0x03
adj saturation (hex)
2 1 saturation value range 0->255 saturation value (hex)
3.89 set sharpness, write
About this command
This command sets the sharpness value of the active source.
Request
Pos
Size
Name Description
Content
0 1 set adj byte value known as "set ad j"
0x20
set adj (hex)
1 1 adj sharpness
0x05
adj sharpness (hex)
2 1 sharpness value range 0->14
(OSD range -7->+7)
sharpness value (hex)
3.90 set TCP/IP, write
About this command
This command sets the TCP/IP settings of the projector.
46
R5905746 COMMAND CATALOG 06/01/2014