Barco PGWU-618 Home Theater System User Manual


 
3. Commands
3.66 set gamma, write
About this command
This command sets the gam m a value.
Request
Pos Size Name Description Content
0 1 set adj byte value known as "set ad j"
0x20
set adj (hex)
1 1 adj gamma
0x70
adj g amm a (hex)
0x00
lm (hex)
0x01
video (hex)
0x02
graphics (hex)
2 1 gamm a value
0x03
standard (h ex)
3.67 set H start, write
About this command
This co mm and sets the horizontal start pixel for the VGA an d BNC inputs.
Request
Pos
Size
Name Description
Content
0 1 set adj byte value known as "set ad j"
0x20
set adj (hex)
1 1 set H start
0x11
set H start (hex)
2 1 H start value range 0->100
(OSD range 0->100)
H s tart value (hex)
3.68 set high altitude, write
About this command
This command sets the high altitude setting.
Request
Pos
Size
Name Description
Content
0 1 set high a ltitude
0x69
set h igh altitude (hex)
1 1 set high a ltitude
0x40
set h igh altitude (hex)
0x00
Off (hex)
2 1 high altitude status
0x01
On (hex)
3.69 set input black balance, write
About this command
This command sets the input black balance v alue of the active source. This is applicable for the specied color.
Request
Pos Size Name Description Content
0 1 set adj byte value known as "set ad j"
0x20
set adj (hex)
1 1 adj input black balance
0x6E
adj inp black balance ( hex)
40 R5905746 COMMAND CATALOG 06/01/2014