Barco PGWU-618 Home Theater System User Manual


 
3. Commands
Request
Pos Size Name Description Content
0 1 lens
0xF4
lens (hex)
1 1 set lens z oom
0x82
set lens zoom (hex)
0x00
zoom in (hex)
2 1 lens zoom value z oom direction
0x01
zoom out (hex)
3.77 set main zoom, write
About this command
This command sets the main zoom in/out.
Request
Pos
Size
Name Description
Content
0 1 set main zoom
0xA0
set main zoom (hex)
1 1 set main zoom
0x00
set main zoom (hex)
2 1 main zoom value range 0->70
(OSD range -20->+50)
main zoom va lu e (hex)
3.78 set menu position, write
About this command
This command sets the menu position.
Request
Pos
Size
Name Description
Content
0 1 set m enu position
0x90
set menu position (hex)
1 1 set m enu position
0x02
set menu position (hex)
0x00
top left (hex)
0x01
top right (hex)
0x02
center (hex)
0x03
bottom left (hex)
2 1 menu p osition value
0x04
bottom right (hex)
3.79 set no signal color logo, write
About this command
This comm and sets the blanking color v alue and logo status, used when no signal is connected.
Request
Pos
Size
Name Description
Content
0 1 set adj byte value known as "set ad j"
0x20
set adj (hex)
1 1 adj no signal color
0x7B
adj no signal co lor (hex)
R5905746 COMMAND CATALOG 06/01/2014 43