Filter
Top Products
2. The Barco Projection Protocol
RS232/422 input (Sub-D) port
Pin Description
5
GND : Ground
6
DSR : Data Set Ready [RS232]
RXD+ : Received Data [RS422]
7
— (not connected) —
8
CTS : Clear To Send
9 RI : Ring In dicator
2.4 The command representation in this manual
About the command representation in this manual
• Titl e : T he title of a command is built up from its function (e.g. network settings), followed by its type (e.g. read).
• Description: A gener al desc ription of the command is giv en in the A bout this comm and section.
• Req uest/Response table: Each row in therequest/response tablerepresentsa datafield. Adatafield contains1 ormore values.
a) Pos: The position ofthe datafield. W hen thesiz e ofthe datafield is greaterthan 1, thedatafield will take morethan 1 position.
b) Size: The num ber of values the datafi eld must contain. This can be different from the total num ber of av ailable values,
dependent on the v alue groups.
c) Name: The nam e of the datafield.
d) Description: The description of the datafield.
e) Content: The value(s) of the datafield. This column c onsists of th e value itself, and a value description. Every value is
displayed in a separate row. A datafield can have different value groups.
Different value group s can be distinguished as follows:
- If consecutive rows have different bac kground colors, the values belong to another group.
- If they have the s ame background color, the values belong to the same grou p.
Only 1 value group per datafie ld m ay be choosen to be used in the c omm and. All the values of a
value group must appe ar
together and in the same order.
Example: the datafield below contains 2 IP addresses. Only 1 of the 2 IP-addresses m ay be choosen in the comm and. The va lues
of the IP-addresses mus t stay in the same order.
Pos
Size
Name Description
Content
192
IP-address 1, value 1 (dec)
168
IP-address 1, value 2 (dec)
1
IP-address 1, value 3 (dec)
1
IP-address 1, value 4 (dec)
192
IP-address 2, value 1 (dec)
168
IP-address 2, value 2 (dec)
1
IP-address 2, value 3 (dec)
0-3 4 IP-address
This is the IP-address data field.
2
IP-address 2, value 4 (dec)
Table 2-5
Example
10 R5905746 COMMAND CATALOG 06/01/2014