Barco PGWU-618 Home Theater System User Manual


 
3. Commands
Pos
Size
Name Description
Content
0x00
red (hex)
0x01
green (hex)
21color
color specication
0x02
blue (hex)
3 1 balance v alue range 0->100
(OSD range 0->100)
balance value (hex)
3.70 set input selection, write
About this command
This command sets the input of the projector.
Request
Pos
Size
Name Description
Content
0 1 write input selection
0x33
write input selection (hex)
0x00
HDMI (hex)
0x01
VGA (hex)
0x02
DVI (hex)
0x03
BNC (hex)
1 1 input slot
0x04
CVBS (hex)
3.71 set input white balance, write
About this command
This command sets the input white balance v alue of the active source. This is applicable for the spec ied color.
Request
Pos
Size
Name Description
Content
0 1 set adj byte value known as "set ad j"
0x20
set adj (hex)
1 1 adj input white balance
0x6F
adj input white balance (hex)
0x00
red (hex)
0x01
green (hex)
21color
color specication
0x02
blue (hex)
3 1 balance v alue range 0->100
(OSD range 0->100)
balance value (hex)
3.72 set internal pattern, write
About this command
This command sets the internal p attern.
Request
Pos
Size
Name Description
Content
0 1 set internal pattern
0x41
set internal pattern (hex)
R5905746 COMMAND CATALOG 06/01/2014 41