Filter
Top Products
3. Commands
Response
Pos Size Name Description Content
0 1 get adj byte value known as "get adj"
0x21
get adj (hex)
1 1 get H start
0x11
get H start (hex)
2 1 H start value range 0->100
(OSD range 0->100)
H s tart value (hex)
3.22 get high altitude, read
About this command
This command gets the high altitude setting.
Request
Pos Size Name Description Content
0 1 get high altitude
0x69
get high altitude ( hex)
1 1 get high altitude
0x41
get high altitude ( hex)
Response
Pos
Size
Name Description
Content
0 1 get high altitude
0x69
get high altitude ( hex)
1 1 get high altitude
0x41
get high altitude ( hex)
0x00
Off (hex)
2 1 high altitude status
0x01
On (hex)
3.23 get image setting info, read
About this command
This command gets the "image setting" info of the projector.
Request
Pos Size Name Description Content
0x2A
0x03
0-2 3 get image setting info
0xA2
Response
Pos
Size
Name Description
Content
0x2A
0x03
0-2 3
get image setting info
0xA2
3 1 contrast value range 0->255
contrast value ( hex)
4 1 brightness value range 0->255
brightness value (hex)
5
1 saturation value range 0->255
saturation value (hex)
6 1 tint v alue range 0->255
tint value (hex)
7
1 sharpness value range 0->14
(OSD range -7->+7)
sharpness value (hex)
81TBD TBD (reserved) (hex)
22 R5905746 COMMAND CATALOG 06/01/2014