Filter
Top Products
MSWU-81E 29/09/2014
49
9.Layout
9.2 Zoom
Due to the fact that some consumers may still be using older television systems, some TV programs may not display the
edges of the image. Use this function to hide the image edge by choosing one of the following three options:
•
Off
Setting it to off makes no change to the projected image.
•
Crop
Setting it to "Crop" will add two "masks" equivalent to 3% of horizontal resolution on either side of the image and two
similar masks above and below the projected image.
•
Zoom
You can use this function to enlarge the image's horizontal resolution over the 106% of the default aspect ratio. Any
portion that exceeds the original image will be cropped.
16:10
Off Crop Zoom
5:4
2.35
When you set aspect ratio to “Native”, be sure to set Zoom to “Off” or “Crop”.
9.3 Main Select
When you want to project PIP image, use this function to specify the image source for the PIP image. This function is identical
to Input Selection; for more information, please refer to page 38: 7.2 Input Selection