Filter
Top Products
MSWU-81E 29/09/2014
15
3.Physical Installation
How to remove the lens
1.
Remove the plastic cap in the opening of the lens holder if not removed yet.
2.
Loosen the screws on the front cover.
3.
Remove the front cover.
4.
Press the release buttom
5.
Counterclockwise rotate the lens to the end then you can follow the forward direction to remove the lens.
CAUTION: Never transport the projector with a Lens mounted in the Lens Holder. Always remove the Lens
before transporting the projector. Neglecting this can damage the Lens Holder and Prism.
It’s recommended to place the Lens caps of the original Lens packaging, back on both sides of the
removed Lens to protect the optics of the Lens.