ATON AH66T-KT Radio User Manual


 
ATON AH66T INSTALLATION MANUAL
© ATON 2010 | All rights reserved. Page 82
Tune Command
Description: Tunes to the selected frequency in the current band. Status can be queried
Examples:
&AH66,R1,TUNE,10350<cr> TUNES (TUNE) CHASSIS ONE’S (R1) radio to frequency
103.50 (10350).*
&AH66,R2,TUNE,UP<cr> TUNES (TUNE) CHASSIS TWO’S (R2) radio UP (UP) by
one step. (103.50 to 103.60, for example.)
&AH66,R2,TUNE,DOWN<cr> TUNES (TUNE) CHASSIS TWO’S (R2) radio DOWN
(DOWN) by one step. (94.60 to 94.50, for example.)
&AH66,R1,TUNE,?<cr> QUERIES (?) CHASSIS ONE’S (R1) radio frequency
(TUNE) setting.
Example query responses: *AH66,R1,TUNE,9450, *AH66,R1,TUNE,10250,
*AH66,R1,TUNE,630, etc.
*This command REQUIRES both digits to the right of the decimal point. You MUST
enter the zero (0) for the command to function.
Prefix TS Parameter 1
Parameter 2
&AH66 R1/R2 TUNE 0-9/UP/DOWN/?