ATON AH66T-KT Radio User Manual


 
ATON AH66T INSTALLATION MANUAL
© ATON 2010 | All rights reserved. Page 43
ELAN
®
V85 Component Video Router Integration
The ELAN
®
V85 is a Component Video Router that provides the ability to view up to 8
different video sources in 8 separate areas (or 16 areas using an additional V85).
Note: When installed in an AH66T system, the V85 is limited to six video inputs and six
video outputs. In a dual AH66T system using two V85s you have six additional video
outputs.
In a dual AH66T system, one V85 is dedicated to the first chassis and the second V85 is
dedicated to the second AH66T.
Video Input # 1 of the V85 is “linked” to Audio Input # 1 of the AH66T; Video Input # 2 of
the V85 is “linked” to Audio Input # 2 of the AH66T and so forth.
Video Output # 1 of V85 # 1 is dedicated to Zone # 1 of the AH66T; Video Output # 2 of
V85 # 1 is dedicated to Zone # 2 of the AH66T and so forth.
Video Output # 1 of V85 # 2 is dedicated to Zone # 7 of the AH66T; Video Output # 2 of
V85 # 2 is dedicated to Zone # 8 of the AH66T and so forth.
Install the V85 and connect video sources and the ELAN CVRM wall plates as described in
the V85 manual.
Connect the A-Net OUT of the MAIN AH66T chassis to the A-Net IN of the second AH66T.
If a C2 is being installed, connect the A-Net OUT of the second AH66T to the VIANet IN of
the C2. Connect the VIANet OUT of the C2 to the VIANet IN of the V85. If two V85s are
being installed, connect the VIANet out of the first V85 to the VIANet IN of the second V85.
Be sure to set the V85 unit ID correctly. See the V85 installation manual for details.
The diagram on the next page shows a dual AH66T system with a C2 Communication
Controller and dual V85s.
For clarity, only the A-Net connections from the AH66Ts to the C2, the VIANet connections
from the C2 to the V85s and the video loop connections for sources one and two are
shown.