Filter
Top Products
ATON AH66T INSTALLATION MANUAL
© ATON 2010 | All rights reserved. Page 38
Sirius
®
SR-H2000 Satellite Radio Integration
In the ATON configuration software determine which Comm Port you will be using to
connect to the tuner. Connect all Sirius Radio components according to the SR-H2000
installation manual. Verify functionality of the SR-H2000.
Note: The SR-H2000 must be set to accept RS-232 control using its Menu settings.
Connect a Cat5 (TIA/EIA568A or B) from the selected Comm Port of the AH66T to the
DB9M-RJ45 adapter. Connect a serial cable from the adaptor to the RS-232 port of the
Sirius tuner.
The MAXIMUM total wire run length from the AH66T’s Comm Port to the RS-232 port of
the Sirius tuner is 50’ (15m).
Figure 4-5: Sirius SR-H2000 Connections
Sirius Tuner feedback is only displayed on the OLED2s. It does not “pass through” to
3
rd
party controllers.
The Sirius SCH2P Tuner may also be incorporated if desired. The connections for the
SCH2P are identical to the SR-H2000 connections.