Filter
Top Products
ATON AH66T INSTALLATION MANUAL
© ATON 2010 | All rights reserved. Page 28
AM Antenna Connection (Continued)
The AM antenna is connected to the terminals marked AM/GND. Connect the striped
antenna lead to the RED terminal. Press the lever, insert the end of the wire, and then
release the lever. Make sure it is fastened securely by pulling the wire gently. Make sure
only the bare, stripped wire is inserted in the jack and that no plastic insulation is
preventing contact between the antenna wire and terminal.
Place the antenna on a shelf, for example, or hang it on a window frame, etc., in the
direction which gives the best reception, as far away as possible from the entire system,
speaker cords and power cords, to prevent unwanted noise.
Figure 3-14: AM Antenna Connection