Filter
Top Products
43
If you want to change the hostname of the DAR300, please note
that hostnames cannot contain special characters or empty spaces.
Select "Hostname" and press OK.
Press or to go to the letters you want to change and enter
the desired name using the number / letter blocks on the remote
control (see also 0).
Press and confirm by pressing OK.
Press . A window is displayed with the question "Accept
changes?"
Press Yes to confirm the change.
Press No to discard the changes.
Press OK.
Press to set the parameters.
Workgroup
The default setting is "Workgroup".
Workgroup is the designation for a group of devices in a network
that should work together. If you use a workgroup, the DAR300
and the PC should belong to the same workgroup.
If you want to change the workgroup name:
Select "Workgroup" and press .
Press or to go to the letters you want to change and enter
the desired name using the number / letter blocks on the remote
control (see also 0).
Press and confirm by pressing OK.
Press . A window is displayed with the question "Accept
changes?"
Press Yes to confirm the change.
Press No to discard the changes.
Press OK.
10.11 Video
The default setting is: PAL / Type: FBAS.
Press OK to toggle between PAL (European standard) and NTSC
(American standard).
Press to go to "Type". Press OK to toggle between FBAS and
S-Video.
Press to confirm the changes.
If your TV is connected to the scart output, leave the default
setting. If your TV supports it, you can switch to "S-Video" to
improve the screen representation.
If your TV is connected to the S-Video output, change to "S-
Video" in the "Type".
If your TV is connected to the video (FBAS) output, leave the
default setting.