Filter
Top Products
37
Select Yes if you really want to rebuild the database.
Select No if you do not want to rebuild the database.
Press OK.
Note: It can take several hours to rebuild the database depending
on the number of files!
10.8.6 Rebuild Photo DB
The DAR300 automatically recognises pictures and adds them to
its database. However, if for some reason picture files that you
have copied to the DAR300 are not displayed in the menus, you
can rebuild the database using this function.
The database must also be rebuilt after a firmware update.
Press OK.
Select Yes if you really want to rebuild the database.
Select No if you do not want to rebuild the database.
Press OK.
Note: It can take several hours to rebuild the database depending
on the number of files!
10.8.7 Statistics selection
Displays the number of files on the "Music", "Photos" and "Files"
drives respectively. The free space on the DAR300 hard drive is
also displayed.
10.8.8 Versions selection
Displays the version number of the software, firmware, system and
hardware.
10.8.9 Update firmware
When new firmware versions are available, they are posted at
www.arcusaudio.com for download. Continuous development of
the firmware ensures that your DAR300 is always up-to-date, e.g.
new functions, etc.
Please find exact instructions for updating the firmware in the
installation instructions that come with the firmware when
downloaded.
Note: After the update is complete, the DAR300 database must
be rebuilt, as well as all individual settings (e.g. Language) in the
Options menu.
! Important:
arcus does not accept responsibility for damages caused by
firmware updates.