Filter
Top Products
36
10.7.8 Get station list
The DAR300 creates a station list of the radio stations currently
being received.
10.8 Tools menu
Use or to select the desired menu item and press OK to go
to sub-menu from the Tools menu.
10.8.1 Copy CD
Copies the CD currently in the drive. Please observe copy
protection regulations.
10.8.2 Backup
The DAR300 saves files on an internal hard drive. You can save
the data externally in case you need to restore it later.
You can choose to backup all files, or just the music, pictures or
file folders. Once you have selected the folders for backup, the
DAR300 asks whether you want to save to your network or an
external USB hard drive. Follow the relative instructions on the
display.
The procedure can take several minutes depending on the amount
of data and the speed of your connection.
You cannot operate the DAR300 during the procedure for security
purposes.
10.8.3 Restore
If you have performed a data backup already, you can restore the
data from the Restore menu item.
You are first asked to specify the location of your backup.
The data is then restored.
The procedure can take several minutes depending on the amount
of data and the speed of your connection.
You cannot operate the DAR300 during the procedure for security
purposes.
10.8.4 Formatting an external device
If you want to save data on an external source (e.g. external hard
drive, USB stick), it must be formatted before it can be used for
the first time. Please note that any data already on the external
memory source will be deleted by this procedure.
10.8.5 Rebuild Music DB
The DAR300 automatically recognises audio files and adds them
to its database. However, if for some reason music files that you
have copied to the DAR300 are not displayed in the menus, you
can rebuild the database using this function.
The database must also be rebuilt after a firmware update.
Press OK.