Filter
Top Products
40
Press to go to the "Format" subitem and press OK to select the
format. Confirm the desired conversion format (rip format) by
pressing OK or cancel the procedure by pressing . Press to
go to the "Quality" subitem and press OK to select the level of
quality. Press OK to confirm or cancel the operation by pressing
. Press to exit the CD menu.
10.9.6 CD Database
Use this menu to set whether title information should be pulled
from the integrated title database (= "Hard Drive") only when a
CD is put in the drive, or if the title information is not in the
integrated title database, whether it should be downloaded from
the Internet (="Hard Drive and Internet").
If the Internet is also used as a source for title information, ensure
that the DAR300 has access to the Internet via a router (e.g. a
DSL router) at all times. If no Internet connection can be
established, the procedure is cancelled after a period of time,
which can lead to unnecessary wait times. Therefore, it is
recommended that this parameter be set to "Hard Drive" if you
are sure that no Internet connection can be established.
For "Mode", press OK to toggle between "Hard Drive" and "Hard
Drive and Internet".
The default setting is "Hard Drive".
Press to exit the FreeDB menu.
10.9.7 Languages
Use this Options menu to select the menu language. Default is
ENGLISH.
A list of languages is displayed that are available from the last
firmware update.
Press or to select the respective language and press OK to
confirm. The arrow shows which language has been selected. The
selected language is applied immediately.
Press to exit this menu.
10.9.8 Date/Time
Set the date and time. Please check these settings (and correct if
necessary) immediately after you first turn on the DAR300 to
make sure that the device is working properly. In "Set Time", press
or to toggle between hours / minutes / seconds. Use or
to change the respective values.
Press .
Press OK to confirm the changes.
Press to select Cancel and press OK to discard the changes.
In "Set Date", press or to toggle between day / month /
year. Use or to change the respective values.
Press .
Press OK to confirm the changes.
Press to select Cancel and press OK to discard the changes.