Filter
Top Products
8
Installation
You should always switch off the DAR300 and
your other systems when working on the wiring!
To make sure that the DAR300 is working correctly, you should check
the time settings immediately after you first switch it on and correct if
necessary.
Use Cinch cables to connect the analogue inputs and outputs of the DAR300
to your Hi-fi amplifier. If using an amplifier with digital input and output, use
an appropriate cable to connect one of the digital inputs and outputs of the
DAR300 to the amplifier. If using a scart cable to connect the DAR300 to a
TV, you can use the extended menu display and view digital photos on the
screen. You must connect the DAR300 to an AV jack on your TV and
configure it there similar to a video recorder. More information is available in
the user's manual of your TV.
After connecting the DAR300, amplifier and TV, plug the DAR300 into the
mains switch (on the rear panel).
Chapte
r
6