Filter
Top Products
44-EN
Setting the Speakers
1
Check that Defeat mode is off (page 20).
2
Press and hold MENU for at least 2 seconds.
3
Select the Speaker Select mode by sliding your
finger on the GlideTouch bar to the left or right.
Press the GlideTouch bar under the Speaker
Select mode.
4
Touch the GlideTouch bar and select the speaker
by sliding it to the left or right, then press the
GlideTouch bar.
5
Touch the GlideTouch bar, and select any
speaker (ON/OFF) by sliding it to the left or right,
then press the GlideTouch bar.
FRONT1: OFF/TW (Tweeter)/FULL (Full Range)*
FRONT2: OFF/ON
REAR: OFF/ON
CENTER: OFF/ON
SUBWOOFER: OFF/MONO/STEREO
* Displayed when “USER’S” is set in “Setting the Reponse Slope for
the High Range Speaker” (page 38).
6
To adjust another speaker, return to the previous
display by pressing MENU and repeat step 5.
7
When the setting is complete, press and hold
MENU for at least 2 seconds.
• Set the speaker which is not connected to OFF.
• Settings above can be carried out even when the speaker is set to
OFF in “Speaker Setup” (page 47).
•To use the subwoofer in MONO with PXA-H700 or PXA-H701
connected, connect the subwoofer to the subwoofer output terminal
of PXA-H700 or PXA-H701.
Set MX Mode of the External Audio
Processor
Before performing the operations below, set MX (Media Xpander)
mode of the PXA-H700 to “AUTO” when the PXA-H700 is connected.
1
Check that Defeat mode is off (page 20).
2
Press MENU.
33
Select the Media Xpander mode by sliding your
finger on the GlideTouch bar to the left or right.
Press the GlideTouch bar under the Media
Xpander mode.
4
Press the GlideTouch bar under ON to activate
MX.
5
After setting, press and hold MENU for at least 2
seconds to return to normal mode.
6
Press SOURCE/POWER to select the source to
which you want to apply MX (Media Xpander).
7
Press and hold MENU for at least 2 seconds.
Adjustment Procedure for Dolby Surround
Make the adjustments described below in order to reproduce Dolby
Digital and DTS sound with greater accuracy.
Adjustment procedure
In case of combining the Automatic adjustments etc.
We recommend to make the Automatic adjustments before the Dolby
Surround adjustments.
Speaker Setup (page 47)
(Turning the speakers to be used on and off and
setting their response)
Adjusting the speaker levels (page 48)
(Adjusting the signal output level to the various
speakers)
Mixing bass sound to the rear channel
(page 48)
(Achieving smooth sound in the rear seat by mixing
the front audio signals with the rear speaker signals)
Adjusting the acoustic image (page 49)
(Adjusting the acoustic image to achieve a sound as
if the centre speaker were directly in front of the
listener)
Achieving powerful high volume sound
(page 49)
(Achieving energetic sound with even greater power,
like the sound in a movie theatre)
Adjusting the DVD Level (page 49)
(Adjust the volume (signal level) in the Dolby Digital,
Pro Logic II, DTS and PCM modes.)
Storing settings in the Memory (page 51)
(Storing all the settings and adjustments made on the
DVA-9965E (not only the above settings/adjusts) in
the memory)
B
B
B
B
B
B
1
2
3
4
5
6
7