Filter
Top Products
30-EN
Displaying the External Amplifier Information
When an Amplifier Link compatible amplifier is connected, the
amplifier's status (voltage, temperature and fan status) can be shown
in the head unit's display.
1
Press TITLE in the Radio or CD mode to switch
the display of the external amplifier information.
•For switching the display, refer to the section “Displaying the
Text” (page 28).
•For changing the iPod display, refer to the section “Displaying the
Text” (page 42).
•To switch the display between Celsius and Fahrenheit, refer to
page 39.
Voltage Display
VOLTAGE:10.1V
42.0˚C
Temperature
Display
The temperature display and
the fan status display are
alternately displayed.
Fan Status
Display
Voltage Display
VOLTAGE:10.1V
HIGH
Setting the Multicolour Illumination
You can change the lighting colour of the following four buttons :
SOURCE/POWER, BAND, g and f.
1
Press MENU.
2
Select the Multicolour Illumi. mode by sliding your
finger on the GlideTouch bar to the left or right.
Press the GlideTouch bar under the Multicolour
Illmi. mode.
3
Change the colour by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under the desired colour.
BLUE ↔ GREEN ↔ AMBER ↔ RED ↔ (USER1-6*)
4
Press SOURCE/POWER to change to the 2 lit
Illumination mode.
5
Touch the GlideTouch bar, and select the lighting
colour for the whole unit by sliding it to the left or
right.
AMBER ↔ GREEN ↔ AUTO
•AUTO: As you change the colour of the illuminated buttons, their
colour switches between AMBER and GREEN.
6
Press FUNC. or the GlideTouch bar to execute.
7
After setting, press and hold MENU for at least 2
seconds to return to normal mode.
*You can also use other colours if they have already been stored in
the USER’S presets described below.
If you want to use colours other than the above
1
Press MENU.
2
Select the Multicolour Illumi. mode by sliding your
finger on the GlideTouch bar to the left or right.
Press the GlideTouch bar under the Multicolour
Illumi. mode.
33
Turn the Rotary encoder to select colours
(1 through 512).
Each press of BAND advances the colour number by 30.
1
..............
19
..............
184
..............
363
..............
512
(Red) (Amber) (Green) (Blue)
4
Select any one of the preset numbers (1 through 6)
by sliding your finger on the GlideTouch bar to
the left or right. Press the GlideTouch bar under
the desired preset to store the adjustment.
To recall the stored colour setting
Select USER'S 1 through 6 in “Setting the Multicolour
Illumination” step 3.
The stored setting contents are recalled.
5
After setting, press and hold MENU for at least 2
seconds to return to normal mode.
• If MENU is pressed while adjusting or setting the items in the
MENU mode, the unit returns to the previous selection screen.
• By pressing the GlideTouch bar under RETURN in the MENU
mode, the unit will return to the normal mode.
• If no operation is performed for 60 seconds, the unit will return to
the normal mode.