Filter
Top Products
29-EN
About “Text”
Text:
Text compatible CDs contain text information such as the disc
name and track name. Such text information is referred to as
“text.”
• Some characters may not be displayed correctly with this device,
depending on the character type.
• The CD changer must also be CD Text compatible for the Text
information to be displayed.
• When the Scroll Setting (page 39) is set to “MANUAL,” press and
hold TITLE for at least 2 seconds to scroll the Text information
only once (TEXT DISPLAY, FOLDER NAME DISPLAY, FILE
NAME DISPLAY or TAG DISPLAY mode).
• “NO SUPPORT” is displayed when the desired text information
cannot be displayed on this unit.
• The text or tag information may not be correctly displayed,
depending on the contents.
• When external audio is interrupted (INTERRUPT is displayed), the
time can be displayed by pressing TITLE.
Displaying Time
Press TITLE repeatedly until the time is displayed.
Each press changes the display.
For details, see “Displaying the Text” (page 28).
Blackout Mode On and Off
When Blackout mode is turned on, the display will turn off to reduce
power consumption. This additional power enhances the sound quality.
Press and hold FUNC. for at least 2 seconds to
activate the blackout mode.
The display will turn off.
• If any button on the unit is pressed during the blackout mode, the
function will be displayed for 5 seconds to show the operation
before returning to Blackout mode.
To cancel Blackout mode, press and hold FUNC. for at least 2
seconds.
Setting Amplifier Link
When an Amplifier Link compatible amplifier (MRD-M1005 or
MRD-M605, etc.) is connected, the amplifier settings are adjustable
from the head unit. A maximum of 8 external amplifiers can be
adjusted.
1
Press and hold MENU for at least 2 seconds.
2
Select the Amplifier Link mode by sliding your
finger on the GlideTouch bar to the left or right.
Press the GlideTouch bar under the Amplifier
Link mode.
3
Select the AMP-1 to AMP-8 to be adjusted by
sliding your finger on the GlideTouch bar to the
left or right. Press the GlideTouch bar under the
desired AMP 1 to 8.
The input level mode to be adjusted is activated.
If a Mono Amplifier is connected
4
Adjust the input level by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under the desired level.
If a 4ch Amplifier is connected
4
Adjust the input level of CH 1/2 by sliding your
finger on the GlideTouch bar to the left or right.
Press the GlideTouch bar under the desired level.
5
Adjust the input level of CH 3/4 by sliding your
finger on the GlideTouch bar to the left or right.
Press the GlideTouch bar under the desired level.
6
When adjustment has been completed, press and
hold MENU for at least 2 seconds to return to
normal mode.
•For details of each of the settings, refer to the Owner’s Manual of
the external amplifier.
• If amplifier settings are made on the unit, do not then change the
setting with the amplifier buttons as the amplifier display may not
match the operations of the unit.
• “No Link” is displayed if the amplifier is removed or its power
cannot be turned on, etc.
• If multiple amplifiers are connected to this unit, set a different ID
on each amplifier. Otherwise the display may flicker.
• External amplifier information display can be changed by pressing
TITLE while adjusting the input level.
• If the GlideTouch bar is pressed and held while adjusting the input
level, the amplifier link mode can be switched between lock and
unlock.
• If MENU is pressed while adjusting or setting the items in the
MENU mode, the unit will return to the previous selection screen.
• By pressing the GlideTouch bar under RETURN in the MENU
mode, the unit will return to the normal mode.
• If no operation is performed for 60 seconds, the unit will return to
the normal mode.