Alpine CVA-1003R CD Player User Manual


 
55-EN
1 Rear/Subwoofer Output RCA Connectors
RED is right and WHITE is left.
2 RCA Extension Cable (Sold Separetely)
3 Ai-NET Connector
Connect this to the output or input connector of other
product equipped with Ai-NET.
4 Ai-NET Cable (Included with DVD video player)
5 Ai-NET Cable (Included with CD Changer)
6 Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead.
This lead outputs the controlling signals from the
remote control.
7 Ground Lead (Black)
Connect this lead to a good chassis ground on the
vehicle. Make sure the connection is made to bare
metal and is securely fastened using the sheet metal
screw provided.
8 RGB Input Connector
Connect to the RGB output terminal of the KCE-
103V.
9 System Switch
When connecting an equalizer or divider using Ai-
NET feature, place this switch in the EQ/DIV
position. When no device is connected, leave the
switch in the NORM position.
NOTE
Be sure turn the power off to the unit before changing the
switch position.
! AUX Audio Input (AUX1) Connector
" AUX Video Input (AUX1) Connectors
# To AUX Input2 Terminals of the KCE-103V
$ Connect to the AUX Input (AUX1) Connecters of
the CVA-1003R
% To AUX Input1 Terminals of the KCE-103V
& Connect to the RGB Input Terminal of the CVA-
1003R
( Connect to the RGB Terminal of the Navigation
System
) To AUX Output Terminals of the KCE-103V
~ RCA Extension Cable (Included with KCE-103V)
+ RCA Extension Cable (Included with DVD Video
Player)
, RCA Extension Cable (Included with KCE-150V)
- RGB Cable (Included with Navigation)
. Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
/ Power Supply Connector
Installation and Connections