Filter
Top Products
20-EN
::
::
:/
JJ
JJ
J
gg
gg
g DN
ff
ff
f UP
TITLE
SOURCE
Select buttons
(1 through 6)
CD Player/Changer Operation (Optional)
5 Repeat the steps 3 and 4 above to complete the
titling. Pressing the :/J button after entering the
8th character, automatically stores the title into
memory.
When entering a title of less than 8 characters
(for example, 3 character title):
After entering 3 characters to complete your title,
the 4th character space will be blinking. Go to
step 6 to complete the title.
6 Press and hold the TITLE button for at least 3
seconds to record the title.
NOTES
• The memory can store up to 150 titles for CD changer.
If you try to store beyond the limit, the display will
show "FULL DATA." At this point, no more titles can
be stored.
• The CD Changer title length or memory capacity
varies depending upon the model being used.
• When you want to erase a title, enter the "
"
symbol into all spaces.
• The operations described in steps 3 to 5 must be made
within 10 seconds. The input mode will be cancelled if
no action is taken for over 10 seconds.
• Removing power from the unit may delete these titles.
Use caution when manipulating the power cord.
Titling Discs
It is possible to title your favourite CD's.
NOTE
The Parking Brake must be engaged to access the Title
display mode screen. Attempting to access this screen
while driving will display the warning-CAN'T OPERATE
WHILE DRIVING.
1 When the monitor display is open, press the
TITLE button and select the title display mode.
For details, see "Displaying the Title/Text" (page
28).
2 Press and hold the TITLE button for at least 3
seconds. The first character will blink.
3 Press the g DN or f UP button to select
the desired letter/numeral/symbol available for
naming.
4 Press the :/J button to store the first character.
The first character will stop blinking and the
display will automatically advance to the next
character. When that character begins to blink,
you may choose the next letter or symbol of your
title.