Filter
Top Products
19-EN
M.I.X. (Random Play)
1 Press the M.I.X. button in the play or pause mode.
The tracks on the disc will be played back in a
random sequence. After all the tracks on the disc
have been played back once, the player will
begin a new random sequence play until the
M.I.X. mode is cancelled.
To cancel M.I.X. play, press the M.I.X. button
again to turn off the M.I.X.
NOTES
• If a CD Changer equipped with the ALL M.I.X.
function is connected, ALL M.I.X. will also be
selectable.
In this mode, the tracks on all the CDs in the current
magazine will be included in the random playback
sequence.
When the monitor display is open: displayed in the monitor
display
• In case a 6-disc CD changer is connected:
In CD changer mode, press the FUNC button to light the
"FUNC" indicator in red and go to step 1.
• In case a 12-disc CD changer is connected:
In changer mode, press the FUNC button twice to light the
"FUNC" indicator in red and go to step 1.
When the monitor display is closed: displayed in the sub
display
• In case a 6-disc CD changer is connected:
In CD changer mode, press the FUNC button to illuminate
the "FUNC" indicator and go to step 1.
• In case a 12-disc CD changer is connected:
In changer mode, press the FUNC button twice to
illuminate the "FUNC" indicator and go to step 1 .
→ M.I.X. → ALL M.I.X. → (off)
Scanning Programmes
1 Press the SCAN button to activate the Scan
mode.
The first 10 seconds of each track will be played
back in succession.
To stop scanning, press the SCAN button and
deactivate the Scan mode.
NOTES
When the monitor display is open: displayed in the monitor
display
• In case a 6-disc CD changer is connected:
In CD changer mode, press the FUNC button to light the
"FUNC" indicator in red and go to step 1.
• In case a 12-disc CD changer is connected:
In changer mode, press the FUNC button twice to light the
"FUNC" indicator in red and go to step 1.
When the monitor display is closed: displayed in the sub
display
• In case a 6-disc CD changer is connected:
In CD changer mode, press the FUNC button to illuminate
the "FUNC" indicator and go to step 1.
• In case a 12-disc CD changer is connected:
In changer mode, press the FUNC button twice to
illuminate the "FUNC" indicator and go to step 1.
CD Player/Changer Operation (Optional)