Filter
Top Products
40-EN
Other Useful Features
Interrupt Feature (MIX LEVEL)
With an Alpine navigation system connected to the CVA-
1003R, the voice guidance of the navigation system will
be mixed with the radio or CD/MD audio. You can also
adjust the volume level of the voice guidance.
If you use this unit connected to an external audio
processor, use the built in amplifier. You cannot use this
function with an external amplifier.
1 When the monitor display is open, press and
hold the SETUP button for at least 2 seconds.
The SETUP screen appears.
2 Press the Preset 6 button to activate the
SYSTEM setting mode. Press the Preset 6
button again to select MIX LEVEL.
3 Press the g DN or f UP button to adjust
the volume level of the navigation system's voice
guidance in 7 steps.
To turn off the navigation system's voice
guidance, press this button repeatedly until OFF
appears.
To set another setting, press the Preset 6 button
or another Preset button.
4 After setting is completed, press the SETUP
button to return to normal mode.
NOTES
• The volume level of the audio will be automatically
reduced when the voice guidance of the Navigation
system starts.
• When the voice guidance of the Navigation system
starts to interrupt the audio, the display is
automatically changed to the navigation screen.
Setting the External Expansion
Box
When using the optional expansion box (KCE-
103V), you can use this function.
1 When the monitor display is open, press and
hold the SETUP button for at least 2 seconds.
The SETUP screen appears.
2 Press the Preset 6 button to activate the
SYSTEM setting mode. Press the Preset 6
button again to select EXPAND BOX.
gg
gg
g DN
ff
ff
f UP
SETUP
Preset 6
FUNC
BAND