Filter
Top Products
38-EN
Other Useful Features
gg
gg
g DN
ff
ff
f UP
Preset 3
SETUP
Preset 5
Preset 6
Switching NTSC/PAL Setting
1 When the monitor display is open, press and
hold the SETUP button for at least 2 seconds.
The SETUP screen appears.
2 Press the Preset 3 button to activate the
AUXILIARY setting mode. Press the Preset 3
button again to select AUX SIG.
When connecting the optional expansion box
(KCE-103V), you can select AUX1 SIG. or
AUX2 SIG.
3 Press the g DN or f UP button to set
NTSC/PAL.
To set another setting, press the Preset 3 button
or another Preset button.
4 After setting is completed, press the SETUP
button to return to normal mode.
NOTES
• When setting PAL, you cannot adjust the TINT.
• In the Navigation mode, the unit automatically
switches to NTSC.
Setting the External Input
1 When the monitor display is open, press and
hold the SETUP button for at least 2 seconds.
The SETUP screen appears.
2 Press the Preset 3 button to select the
AUXILIARY setting mode. Press the Preset 3
button to select the desired external input, AUX
IN or NAV.IN.
• If the expansion
BOX KCE-103 (not supplied)
is
connected and the unit is set to
Expand Box ON
(page 40), you can select AUX-1 IN/AUX-2 IN/
NAV.IN.
3 Press the g DN or f UP button to set ON/
OFF.
To set another setting, press the Preset 3 button
or another Preset button.
NOTE
When
∗
1
AUX IN (
∗
1,
∗
2
AUX1 IN,
∗
2
AUX2 IN) and NAV.IN
are set to ON, the EXTERNAL INPUT is displayed
during the source and SIMUL switching.
∗
1
When a DVD player or DVD changer is connected,
DVD player or DVD changer is displayed in the
display.
∗
2
When more than two DVD players or DVD changers
are connected, DVD player is displayed in AUX1 IN,
and DVD changer is displayed in AUX2 IN.
4 After setting is completed, press the SETUP
button to return to normal mode.