Filter
Top Products
26-EN
DVD/Video CD/CD Player Operation (Optional)
Repeat Play
1 Press the RPT button during play to repeatedly
play the chapter/track or title/disc being currently
played.
Each press changes the repeat play as follows:
DVD:
Video CD/CD:
NOTES
• The track/disc repeat modes cannot be used on video
CDs with playback control (PBC). Press "MENU" to
turn the PBC function off. For more details, see the
operating instructions of your DVD player.
When the monitor display is open: displayed in the
monitor display
• In case a 6-disc DVD changer is connected:
In DVD changer mode, press the FUNC button to light
in red the "FUNC" indicator and go to step 1.
When the monitor display is closed: displayed in the
sub display
• In case a 6-disc DVD changer is connected:
In DVD changer mode, press the FUNC button to
illuminate the "FUNC" indicator and go to step 1.
Chapter
(repeat play)
Title
(repeat play)
Repeat Off
(normal play)
→→ →
Track
(repeat play)
Disc
(repeat play)
Repeat Off
(video CD only)
→→→
Controlling DVD Changer
If an optional Alpine DVD Changer is connected
to the CVA-1003R, the DVD Changer can be
controlled from the CVA-1003R.
1 Press the SOURCE button. The "DVD Changer"
appears in the monitor display.
"DVD CHG" is displayed in the sub display.
2 Press the Disc Select buttons (1 through 6)
corresponding to one of the discs loaded in the
DVD changer.
Playback starts.
NOTES
• After selecting the desired disc, you can operate in the
same way as for the DVD/Video CD/CD Player.
For details please see the DVD/Video CD/CD Player
Operation section.
• When the "FUNC" indicator is lit in red in the monitor
display, or is lit in the sub display, the disc select
buttons become nonfunctional.
RPT
SOURCE
Disc Select
buttons
(1 through 6)