Filter
Top Products
Specifications
Rear Panel I/O (switchable)
Analog:
A
ll measurements done over
a 22 Hz - 22 kHz range with 1
kHz sine wave at -1dBFS
input. Impedances are
measured at 1 kHz.
Input Connectors: 8 balanced 1/4” TRS jacks
Output Connectors: 8 balanced 1/4” TRS jacks
Digital:
Input Connector: 1 ADAT Optical
Output Connector: 1 ADAT Optical
Switch set to +4:
Nominal input level: +4dBu (-15dBFS)
Maximum input level: +19dBu (6.9 Vrms)
Nominal Output Level: +4dBu (-15dBFS)
Maximum Output Level: +19dBu (6.9 Vrms)
Switch set to –10:
Nominal input level: -10dBV (-16dBFS)
Maximum input level: +6dBV (2.0 Vrms)
Nominal Output Level: -10dBV (-16dBFS)
Maximum Output Level: +6dBV (2.0 Vrms)
Input impedance: 10kΩ
Output Impedance: 220Ω
MIDI:
MIDI Input: 1 5-pin female DIN
MIDI Output: 1 5-pin female DIN
Audio Performance
Signal To Noise Ratio: >100dB A-Weighted, Analog In
to Analog Out
THD+N: <0.005%, Analog In to Analog
Out
Frequency Response: 22-22kHz ± 0.50dB, Analog In
to Analog Out
Power Consumption: 15 Watts Max (100-240 VAC /
50-60 Hz)
Mechanical
Size: 1.75" H x 19.0" W x 5" D
Rack Spaces: 1 Space
Weight: 3.0 lbs. (1.4 kg)
65