Aiwa XR-H33MD Stereo System User Manual


 
the recording sound will be monaural.
1 Insert a recordable MD into the disc drive with the label side up and in the direction of the arrow.
2 Press one of the function buttons and prepare the source to be recorded.
To record from a tape, press the TAPE button and insert a tape.
To record from the radio, press the TUNER button and tune in a station.
• To record from a source of equipment connected to DIGITAL IN terminal on the rear, press AUX/D-IN repeatedly
until "D-IN" appears in the display.
• To record from a source of equipment connected to AUX IN terminal on the rear, press AUX/D-IN repeatedly until
"AUX" appears in the display.
3 Press MODE three times.
REC MODE? is displayed for 10 seconds.
4 Within 10 seconds, press ENTER and turn MULTI JOG so that "REC: MONO?" displays.
5 Within 10 seconds, press the ENTER button.
MONO flashes on the display.
6 Press MODE twice.
Mark MODE? is displayed for 10 seconds.
7 Within 10 seconds, press the ENTER button and turn the MULTI JOG control to select an index mark
mode.
To register index marks automatically at the beginning of each track, select "Mark:AUTO?".
To register index marks every 5 minutes, select "Mark:TIME?".
To register without index marks, select "Mark:OFF?".
8 Within 10 seconds, press the ENTER button.
9 Press MD REC.
Unit enters the standby mode and waits until the remaining recordable time of the MD is displayed.
10 Press the button to start recording.
11 Press the button to stop recording.