Filter
Top Products
To play one disc only, press one of the DISC DIRECT PLAY 1-3.
The selected disc is played once.
To stop play, press the button.
To pause play, press the button. To resume play, press again.
To search for a particular point during playback, keep the or button pressed and release the button at
the desired point.
To skip to the beginning of a track during playback, press the or button repeatedly or turn MULTI
JOG until the desired track is displayed.
To remove discs, press the OPEN/CLOSE button.
To check the remaining time
During play, press the EDIT/CHECK button on the remote control while pressing the SHIFT button. The amount of
time remaining until all tracks finish playing is displayed. To restore the playing time display, repeat the above.
Selecting a track with the remote control
1 Press the DISC DIRECT PLAY 1-3 to select a disc.
2 Press the numbered buttons 0-9, and +10 button to select a track.
Example:
To select the 25th tack, press the +10 twice and 5.
To select the 10th track, press the +10 and 0.
The selected track starts to play and play continues to the end of that disc.
Replacing discs during play
While one disc is playing, the other discs can be replaced without interrupting play.
1 Press DISC CHANGE.
2 Remove the discs and replace with other discs.
3 Press the OPEN/CLOSE button to close the disc compartment.
NOTE
• When loading an 8-cm (3-inch) disc, put it onto the inner circle of the tray.
• Do not place more than one compact disc on one disc tray.
• Do not tilt the unit with discs loaded. Doing so may cause malfunctions.
• Do not use irregular shape CDs (example: heart-shaped, octagonal ones). It may result in malfunctions.
CD PLAYING (cont.) pg. 12
RANDOM/REPEAT PLAY
Use the remote control.
RANDOM play
All the tracks on the selected disc or on all the discs can be played randomly.
REPEAT play