Filter
Top Products
6 Press the MD REC button.
Unit enters the standby mode and waits until the remaining recordable time of the MD is displayed.
7 Press the button to start recording.
8 Press the button to stop recording.
When the recording finishes, TOC EDIT is displayed and the data concerning the contents of the recording are
registered.
To add index marks during recording
Press the ENTER button at the desired point during recording.
NOTE
• There may be a case where marks are not registered accurately even if the Auto MARK is selected.
• You can not register index marks without registering track numbers.
To prevent accidental erasure of recorded material
Slide the record-protect tab as shown below.
Slide the tab so that it is completely locked.
If a recording is attempted when the tab is set to the protected position, "Protected" appears on the display. Slide the
recording protect tab to the original position.
MD RECORDING (cont) pg. 23
EXTENDED RECORDING -
MONAURAL
RECORDING
Twice as long as the time printed on the MD can be obtained by using the monaural recording mode. In this case,