Filter
Top Products
interruption, if you press the DISC CHANGE button to replace the CDs during recording.
1 Insert a recordable MD into the disc drive with the label side up and in the direction of the arrow.
2 Press the CD button and load the CDs to be recorded.
3 Press the CD MD button twice to start recording.
"CD MD single" is displayed and recording begins with the first track of the CD on tray 1.
To replace CDs during recording, press the DISC CHANGE button and replace with other CDs. Then, press the
DISC CHANGE button to close the disc compartment.
When recording finishes, TOC EDIT is displayed and the data concerning the contents of the recording are
registered.
• The index mark is registered automatically at the beginning of the track.
Display information during recording
When DISP is pressed repeatedly during recording, the display changes as follows.
* During "AUTO FIRST TRACKS RECORDING", the remaining time of CD is not displayed.
PROGRAMMED RECORDING OF CDS
Up to 30 tracks can be programmed and recorded from any of the inserted CDs.