Filter
Top Products
The unit can store a total of 32 preset stations. (Each band has a maximum of 20 available preset stations.) When a
station is stored, a preset number is assigned to the station. Use the preset number to tune in to a preset station
directly.
1 Press the TUNER/BAND button to select a band. Then, press the DOWN or UP button to
select a station.
2 Press the SET button to store the station.
A station is assigned a preset number for each band in consecutive order beginning from 1.
3 Repeat steps 1 and 2.
The next station will not be stored if a total of 32 preset stations have already been stored for all the bands or a total
of 20 preset stations for one band have already been stored.
PRESET NUMBER TUNING
Use the remote control to select the preset number directly
1 Press the BAND while pressing SHIFT to select a band.
2 Press the numbered buttons 0-9 and +10 to select a preset number.
Example:
To select preset number 20, press the +10, +10 and 0 buttons.
To select preset number 15, press the +10 and 5 buttons.
Selecting a preset number on the main unit
Press the TUNER/BAND button to select a band. Then, press the PRESET button repeatedly or turn the
MULTI JOG control.
Each time PRESET is pressed, the next highest number is selected.
To clear a preset station
Select the preset number of the station to be cleared. Then, press the CLEAR button, and press the SET button
within 4 seconds.
The preset numbers of all other stations in the band with higher numbers are also decreased by one.