Filter
Top Products
PROGRAMMED EDIT RECORDING
Programmed edit function enables CD recording while check the remaining time on each side of the tape as the
tracks are programmed.
NOTE
The programmed edit recording will not start from a point halfway in the tape. The tape must be recorded from the
beginning of either side.
1 Insert the tape into deck 2.
Insert the tape with the side to be recorded on first facing out from the unit.
2 Press the CD button and load the CD(s).
3 Press the EDIT/CHECK button twice on the remote control while pressing SHIFT.
PRGM lights up.
When "AI" is displayed, press EDIT/CHECK while pressing SHIFT again.
4 Press the numbered buttons 0-9 on the remote control to designate the tape length.
10 to 99 minutes can be specified.
5 Press the DISC DIRECT PLAY 1-3 to select a CD. Then, press the numbered buttons 0-9 and +10 button
to program a track.
6 Repeat step 5 for the rest of the tracks for side A.
A track whose playing time is longer than the remaining time cannot be programmed.