Filter
Top Products
1 Insert a recordable MD into the disc drive with the label side up and in the direction of the arrow.
2 Press CD and load CDs.
3 Press PRGM on the remote control while pressing SHIFT.
PRGM is displayed.
4 Press the DISC DIRECT PLAY 1-3 to select a CD. Then, press the numbered buttons 0-9 and +10 button to
program a track.
5 Repeat step 4 to program other tracks.
6 Press the CD MD button to start recording.
Recording begins.
When the programmed tracks finish playing, the recording stops automatically.
When the recording finishes, TOC EDIT is displayed and the data concerning the contents of the recording are
registered.
• The index mark is registered automatically at the beginning of each track in the programmed order.
MD RECORDING (cont) pg. 21
RECORDING THREE CDS
CONTINUOUSLY
MD REC is used for recording. In this case, the sound of the CD is carried toward the MD as analog signals.
1 Insert a recordable MD into the disc drive with the label side up and in the direction of the arrow.
2 Press CD and load the CDs on the trays.
3 Press MODE twice.
Mark MODE? is displayed for 10 seconds.