Filter
Top Products
appears on the display.
Within 6 seconds, carry out the steps of "SETTING THE TIMER" from step 3 and insert the tape to be recorded into
deck 2 after step 6.
• When the power-economizing mode (page 6) has been turned on, the timer recording volume level will be 0
(minimum level).
• You cannot use the timer function to record from a CD, tape or MD.
OTHER CONNECTIONS pg. 29
CONNECTING OPTIONAL EQUIPMENT
Refer to the operating instructions of the connected equipment for details.
• The connecting cords are not supplied. Obtain the necessary connecting cords.
• Consult your local Aiwa dealer for optional equipment.
VIDEO/AUX JACKS
This unit can input analog sound signals through these jacks. Use a cable with RCA phono plugs to connect audio
equipment (turntables, LD players, VCRs, TV, MD players etc.).
Connect the red plug to
R
jack, and the white plug to
L
jack.
When connecting a turntable
Use an Aiwa turntable equipped with a built-in equalizer amplifier.
MD JACKS
This jack is recommended to connect with an MD player.
Use a cable with RCA phono plugs.
Connect the red plug to the
MD R
jack, and the white plug to the MD L jack.
• When MD player is connected to these jacks, no sound will be output from the
LINE OUT
jacks.
LINE OUT JACKS
This unit can output analog sound signal through these jacks.