Filter
Top Products
1 Press FREQUENCY UP or FREQUENCY DOWN to select a frequency.
The level indicator of the selected frequency flashes.
2 Turn MULTI JOG to adjust the level of the selected frequency.
3 Repeat steps 1 and 2 to make the desired equalization curve.
4 Within 4 seconds, press ENTER. "MEMORY" is displayed for 8 seconds.
5 Within 8 seconds, press one of the graphic equalizer preset buttons M1-M4.
The equalization curve is stored.
The equalization curve has been memorized to M1.
To select a manual-preset GEQ
1 Press PRGM/MANU to select the manual mode. One of the MANUAL indicators is selected.
2 Press one of the graphic equalizer preset buttons M1-M4.
To cancel the selected mode
Press the selected button again. "GEQ OFF" is displayed.
To adjust the volume of the surround speakers
Press MANUAL SELECT twice or three times on the remote control. "S-L" or "S-R" is displayed for 2 seconds.
Press or on the remote control within these 2 seconds.
• The DOLBY PRO LOGIC (page 23) and the DOLBY DIGITAL SURROUND (page 30) surround speakers level