Filter
Top Products
• When playing back a tape recorded with BBE, it is recommended that BBE be set to off to avoid distorted high
frequency sound.
• The BBE system does not perform wile the 5.1 CH (page 30) or the DOLBY PRO LOGIC (page 23) is selected.
SOUND (cont) pg. 8
SUPER T-BASS SYSTEM
The T-BASS system enhances the realism of low frequency sound.
Press T-BASS.
Each time it is pressed, the level changes. Select one of the three levels, or the off position to suit your preference.
Low frequency sound may be distorted when the T-BASS system is used for a disc or tape in which low frequency
sound is originally emphasized. In this case, cancel the T-BASS system.
Using the headphones
Connect the headphones to PHONES with a stereo standard plug (
∅
6.3 mm, 1/4 inch)
.
No sound is output from the speakers while the headphones are plugged in.
• When the headphones are plugged in, the SURROUND system (page 12), the DOLBY PRO LOGIC (page 23) and
the 5.1 CH (page 30) do not function.
RHYTHM PLAY FUNCTION (BEAT
MASTER DX)
USING THE BEAT FUNCTION
This unit has a library of rhythm patterns from which you can select the desired one to add to the playback of any
music sources, thus allowing you to create your original sounds.
The mix created with the BEAT function can be recorded on tape if you want to. Also, the mix is available at
LINE
OUT
.
The BEAT function is not available when making a tape copy between two tape decks using SYNC DUB.
To select a rhythm pattern