Filter
Top Products
• The numbered buttons 0-9 or MULTI JOG are also available to designate the tape length.
5 Press DISC DIRECT PLAY, then press numbered buttons 1-5 within 3 seconds on the remote control to
select a disc. Then press numbered buttons 0-9 and +10 to program a track.
Example: To select the 10th track of disc 2, press DISC DIRECT PLAY and 2, then press +10 and 0.
6 Repeat step 5 for the rest of the tracks for side A.
A track whose playing time is longer than the remaining time cannot be programmed.
7 Press CD EDIT/CHECK to select side B and program the tracks for side B.
After confirming B on the display, repeat step 5.
8 Press REC/REC MUTE to start recording.
The tape is rewound to the beginning of the front side, the lead segment is played through for 10 seconds, and
recording starts. When recording on the front side (A) ends, recording on the back side (B) starts.
To stop recording
Press . Recording and CD play stop simultaneously.
To check the order of the programmed track numbers
Before recording, press CD EDIT/CHECK to select side A or B, and press or repeatedly or turn
MULTI JOG.