Filter
Top Products
To turn the power on
Press one of the function buttons (TAPE, TUNER, VIDEO/AUX, CD, MD).
Playback of the inserted disc begins, or the previously tuned station is received (Direct Play Function).
POWER is also available.
When the unit is turned on, the disc compartment may open and close to reset the unit.
To turn the power off
Press POWER.
Illumination guides
Whenever one of the function buttons is pressed, the buttons for that operation light up or flash.
Flash windows
The windows of the CD compartment and the cassette decks light up or flash while the unit is being powered on.
To turn off the light of the CD window, press while pressing CD. To turn back on, repeat the above.
To turn off the light of the cassette decks, press while pressing TAPE.. To turn back on, repeat the above.
• Do not perform this operation furring recording.
To change the brightness level of the display
1 Press ECO so that "ECO MODE" is displayed.
2 Within 4 seconds, turn MULTI JOG to display "DIM MODE", and then press ENTER within 4 seconds.
3 Within 4 seconds, turn MOULTING to select the dimmer mode as below
The mode will be automatically set after 4 seconds. It will also be set if ENTER is pressed within 4 seconds after
step 3..
DIM-OFF: The normal display.
DIMMER 1: The illumination of the display is dimmer than usual.
DIMMER 2: The illumination of the display is dimmer than DIMMER 1.
DIMMER 3: The illumination of the display is dimmer than DIMMER 2. The spectrum analyzer, the window of the
CD compartment and the buttons lamps light off.
If the timer recording (page 26) is done with the economizing mode (page 6) set to "ON" and the power turns off, the
dimmer mode will be set to "DIMMER" the next time power is turned on.
Game Demo