SX-ND8 Front speakers
SX-R275 Surround speakers
SX-C605 Center speaker
Operating Instructions, etc.
POSITIONING THE SPEAKERS
To achieve the optimum effects obtainable with the DOLBY PRO LOGIC system, it is important to position the
speakers properly. Refer to the following illustration to find out the best location in your room.
(1) Front speakers
(2) Center speaker
Position in the center of the two front speakers. In addition, position on or below the TV set, if connecting a TV set
to the unit.
(3) Surround speakers
Place the surround speakers directly to the side of or slightly behind the listening area. Align them horizontally,
about 1 meter (3.2 feet) above ear height.
• No sound is heard from the center and surround speakers when the DOLBY PRO LOGIC, the SURROUND
system and the 5.1 CH (page 30) are set to off.
• The center speaker sounds when the DOLBY PRO LOGIC or the 5.1 CH (page 30) is set to on.
CONNECTIONS
Before connecting the AC cord
The rated voltage of your unit shown on the rear panel is 120 V AC. Check that the rated voltage matches your local
voltage.