Filter
Top Products
restore the playing time display, press CD EDIT/CHECK again.
Selecting a track with the remote control
1 Press DISC DIRECT PLAY, then press one of the numbered buttons 1-5 within 3 seconds to select a disc.
2 Press numbered buttons 0-9 and +10 to select a track.
Example:
To select the 25th track, press +10, +10 and 5.
To select the 10th track, press +10 and 0.
The selected track starts to play and play continues to the end of that disc.
Replacing discs during play
While one disc is playing, the other discs can be replaced without interrupting play.
1 Press DISC CHANGE.
Two discs can be replaced.
2 Remove the discs and replace with other discs.
To replace the other two discs, press DISC CHANGE again.
3 Press OPEN/CLOSE to close the disc compartment.
CD PLAYING (cont.) pg. 14
• While the disc compartment is opened with DISC CHANGE, do not press buttons other than DISC CHANGE or
OPEN/ CLOSE. Doing so may cause malfunctions. In this case, reset the unit referring "To reset" on page 31.
• When loading an 8-cm (3-inch) disc, make sure to put it onto the inner circle of the tray precisely. Otherwise, the
disc may be damaged or the disc compartment will not open. If it does not open, please consult your Aiwa dealer for
repair.
• Do not use irregular shape CDs (example: heart-shaped, octagonal ones). It may result in malfunctions.
• Do not place more than one compact disc on one disc tray.
• Do not tilt the unit with discs loaded. Doing so may cause malfunctions.
• When transporting the unit, remove the discs from the trays.
• When replacing the discs during play, do not replace discs other than those facing you.
If you place a disc on the empty right inner tray, and then press OPEN/CLOSE, "ERROR" is displayed and the
disc compartment may not close. Remove the disc on that tray.
RANDOM/REPEAT PLAY
Use the remote control.
RANDOM play
All the tracks on the selected disc or on all the discs can be played randomly.