3M XT-1 Headphones User Manual


 
Overview
3M™ Drive-Thru Systems Model G5 and Model XT-1
Operating Instructions
November 6 2014 – Revision 2.1
Page 9 of 77
The XT-1 Base Station complies with FCC RF radiation exposure limits.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator and your body. This includes any external
antenna. For any external antenna that is used with the XT-1 Base Station,
the minimum length of RF cable required is 75 feet.
The use of accessories not approved by 3M Company, including but not
limited to batteries, antennas, wall adapters, chargers, ear pads and foam tips
and convertible covers, may cause your headset to malfunction or in the case
of unapproved electrical accessories may cause the devise to exceed RF
energy exposure guidelines.
FCC Note:
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
Canada Note: CAN ICES-3 A/NMB-3 A
This device complies with part 15 of the FCC Rules and with Industry Canada
license-exempt standard RSS-210 as of the date printed. Operation is subject
to the following two conditions: (1) this device may cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
Cet appareil est conforme avec la norme RSS-210 d'Industrie Canada exempte
de licence à compter de la date imprimée. Son fonctionnement est soumis aux
deux conditions suivantes : (1) cet appareil peut causer des interférences, et
(2) cet appareil doit accepter toute interférence, y compris celles pouvant
provoquer un fonctionnement indésirable de l'appareil.
FCC and IC Identifiers:
XT-1 Headset:
FCC ID: DGFBCSDXT1H
IC: 458A-BCSDXT1H
XT-1 Base Station:
FCCID: DGFBCSDXT1B
IC: 458A-BCSDXT1B
3M™ Drive Thru Headset G5:
FCCID: DGFBCSDG5H1
IC: 458A-BCSDG5H1