Filter
Top Products
Appendix: Greeter Module
November 6 2014 – Revision 2.1
Page 66 of 77
3M™ Drive-Thru Systems Model G5 and Model XT-1
Operating Instructions
:CHOOSE HEADSETS MESSAGES PLAYBACK TO:
Msg.<011> [Reminder 1 ] [REMINDER]
[Headset 1234]<YES>
▐
[Headset 2020]<YES>
[XXXXXXXXXXXX]<YES>
▐
[XXXXXXXXXXXX]<YES>
3.
Using the
,
,
⊳
,
and
Enter
keys, select a message number to
record.
Msg.<011>
.
Note:
Only REMINDER and ALERT messages are available for this function.
4.
Using the
,
,
⊳
,
and
Enter
keys, select the desired headset
YES/NO field and modify.
[Headset 1234]<NO >
.
Note:
The headsets are given a default name, when registered, of “Headset
SSSS”, where SSSS is the last 4 digits of the headset serial number. The
names can be modified in the System
08 Headset Setup
menu.
Message Daypart Definitions
The second step to configuring the greeter module is the messaging dayparts.
This allows the system to play GREETER and REMINDER messages on a pre-
configured schedule automatically. Perform the following procedure to define
the messaging dayparts, specifying the name, start time and end time for each:
1.
Enter the greeter configuration menu.
2.
Select
4 Message Daypart Definitions
.
:MESSAGE DAY PART DEFINITIONS:
Message Day Part Start End
01:> Breakfast < <06:00> <10:00>
02:< Morning > <10:00> <11:00>
3.
Using the
,
,
⊳
,
and
Enter
keys, select a message daypart. Use
the keypad to modify the Daypart Name, Start Time, and End Time.
4.
Repeat for up to 12 dayparts. The daypart times can be overlapping.
Greeter Message Properties
The Greeter Message Properties menu is a collection of settings affecting the
message type GREETER.
1.
Enter the greeter configuration menu.
2.
Select
5 Greeter Message Properties
.
:GREETER MESSAGE PROPERTIES:
Playback After Delay Of >00< Seconds.
Playback Mode:<Alternating>
Playback To The Headsets?<Yes>
Change Playback Delay Time
Playback delay time is the number of seconds between when the vehicle detector
detects a vehicle and when the greeter begins to playback the message.
Perform the following procedure to change the playback delay time: