Filter
Top Products
Operation
3M™ Drive-Thru Systems Model G5 and Model XT-1
Operating Instructions
November 6 2014 – Revision 2.1
Page 43 of 77
Figure 4
Out of Range
In addition to “Change Battery Now” you may also hear a message for “Out of
Range.” If you hear this in your headset, you need to move closer to the Base
Station. You will know you are in range when you hear the message “Lane 1”
or “Lane 2.”
Cleaning
For good health and hygiene, you should clean the headsets regularly. Here are
some guidelines:
•
Check the headsets every day. If they are dirty, clean them. Even if
they don’t look dirty, every headset should be cleaned on a regular
schedule.
•
Before cleaning, remove the soft foam ear pad and microphone
windscreen. If used.
•
Use a soft cloth and mild cleaning solution to wipe the surfaces clean.
We recommend using a 3M™ 5040/7065 Cleaning Wipe or a Scotch-
Brite® High Performance Cloth lightly dampened with 3M™ Food
Service Degreaser, 7L.
•
Remove stubborn particles from switches and clear plugged speaker
holes with a soft toothbrush.
•
Gently clear plugged holes in the microphone tip with a wooden
toothpick.
•
Do NOT soak the headset or immerse it in water; you might damage
the electronics.
•
Do NOT bend the battery contact or microphone boom.