Filter
Top Products
Configuration
November 6 2014 – Revision 2.1
Page 20 of 77
3M™ Drive-Thru Systems Model G5 and Model XT-1
Operating Instructions
Acoustic Echo Canceller
Perform the following procedure if there is a delayed repetition (echo) of the
outbound sound:
• Enter the base station configuration mode, see page 11.
• Make a new selection for
05 Noise Reduction
>
Acoustic Echo
Canceller
. Options are
Min
,
Low
,
Med
, and
Max
. You may need to
experiment for a setting that works best for your ambient noise
environment and staff.
Set System Date and Time
Perform the following procedure to set the system time and date.
• Enter the base station configuration mode, see page 11.
• Change the date and time values for
06 Set Time & Date
in the
Time
and
Date
fields as required. Use the arrows to scroll from one
field to the next and type new values over the existing data in the
formats shown in parentheses:
•
HH
= Hours (01 to 24, e.g., 6:00 pm is 18)
•
MM
= Minutes (01 to 60)
•
SS
= Seconds (01 to 60)
•
MMM
= Month (Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct,
Nov, or Dec)
•
DD
= day (01 to 31)
•
Year
= Last two digits of the year (00 to 99,
20
is fixed and
cannot be changed)
Change Global Settings
Global settings are an assortment of options that you must choose based upon
the basic configuration of your system.
Text and Audio Prompts Language
You can choose between English, Spanish, German, and French language for all
text and audio prompts, which is essentially all of the factory prerecorded
information coming from the base station and all of the printed text on the
display.
Note:
Changing the text and audio prompt language will also change the language of
the headset messages.
Perform the following procedure to change the text and audio prompts:
• Enter the base station configuration mode, see page 11.
• Change the value for
07 Global Settings
>
Text & Audio
Prompts Language
to
English
,
Español
,
Deutsch
, or
Francais
.
Drive Thru Audio Duplex Mode
The system can function using half duplex or full duplex modes. Choosing
between the two modes is based upon the desired operation.